RK Enterprise



How To Use Cut Fabrics?

Posted by Admin on June, 27, 2020

Even if you are an expert you will face difficulty while working with cut fabrics that are not in proper size. If you are having trouble with your designs and patterns but following every step then the problem can be because of the preparation than the main work.
Do not worry, this article will give you some tips on how to use a cut fabric and how to measure it perfectly.

What do You need?
Before you begin, make sure you have the measurements. If you are working on a sewing pattern then it is usually easy. If you learn the pattern well enough then you will know how much cut fabric you will need. For people who make garments with this cut fabric, this will be less complicated. If you are making a garment for yourself, this can be little tricky thus take help of someone. Take a little extra time than you start placing the cut fabric. This way you will get a perfect fit and design.

Take A Moment And Measure Again
If you are using cut fabric for the first time, for you, it is advisable to take a couple of minutes and check whether you have measured the fabric properly and have learned how you will use cut fabric. If you want things to be perfect and fine, check your preparation twice. Check every measurement and the fabric twice before you cut it or sew it. Get cut fabric from the best cut work fabrics exporter for this work.

Buy Extra
It is always better to buy two or three extra fabric so that if you spoil any by chance you can use the other one in place of it. You should also take extra measurements before you cut the fabric and place it on the garment. Cutting all along the edge and buying the required amount can be risky.

Mark The Fabric
Always mark the fabric on which you are using it or make a straight line so that the things you place are aligned and look amazing. There are tailors shall for this job which doesn’t leave a permanent mark on the fabric.

Make Sure To Wash And Iron
Sometimes the cut fabric that you receive from the exporter can get wrinkles and folds due to shipment. When you iron it the fabric becomes straight and also it is easy to use that way. It is advised to wash them before use as hygiene is important. So ensure that the product is clean and ironed before you use to get better results following cleanliness and safety standards.

Work On Flat Surfaces
Have you tried cutting a wrapping paper on your bed? It is tough right. You will not get straight lines and ultimately will spoil the paper with curves and edges. But on the other hand, if you cut the paper on flat surface things will be easier. Similarly, one should cut or sew fabric only on the flat surface to get better results.
These were some guidelines which one should follow while working with cut fabric, to get better results.




This entry was posted on June, 27, 2020 at 11 : 43 am and is filed under Cut Work Fabric. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response from your own site.

Leave a Comment

(required)
(required) (will not be published)


Looking for Product Name ?